Bickford Anesthesia Machine with Sevo Vaporizer Bundle Deal
BIC51111-B1
Purchase the Anesthesia Machine and Vaporizer together, get a discount on the Vaporizer.
Anesthesia Machine Features
Cast aluminum base with brushed and buff polished finish.
Mounted on 3" ball bearing casters, 2 with brakes, 28" diagonal wheel base.
Table top is solid aluminum plate, 13" square, bolted to the base through a 3" diameter chromed steel column.
All components are mounted to the table top, including the back-bar or lab-rack, which mounts the flowmeters and vaporizers.
Left front corner is fitted with an aluminum pole for mounting the CO2 absorber close to the patient location with adjustable height provided. The SUPERSORBER™, CO2 absorber is standard and included in all models except model 61010. (Supersorber features described, below.)
Also mounted at the left front corner is the common outlet and the oxygen flush valve module.
Flowmeters are individual modules equipped with precision needle valves, etched scale, ribbed glass flowmeter tubes, protected and mounted in forged aluminum housings.
Cylinder yokes are rear mounted and each is directly connected to the high pressure regulator port.
On models equipped with 2 gases (O2 & N2O), a “fail safe” device is provided which cuts off N2O in the event that O2 pressure fails.
All models provide D.I.S.S. connections for external gas supplies.
One custom "E" Cylinder Yoke
All controls, gauges, flowmeters, vaporizers, etc. are visible and accessible from the front of the anesthesia machine at eye level.
5 year warranty and comes fully assembled
Sevo Vaporizer Features:
Temperature compensated.
Output concentration stable during assisted respiration pressure pulses.
Filler-drain-contents window combined in easy access single unit.
Large dial with easy to see numbers has “off” lock and calibration indents.
Dial Rotation: CW to decrease and “off” CCW for “on” and increase.
“Off” Position locks to prevent accidental actuation of vaporizer.
When “Off”, vaporizing chamber is isolated and gas is bypassed to outlet.
Tamperproof adjustments – dial seal must be broken for access.
Sump may be removed for cleaning or wick replacement without disturbing calibration by removing one screw.
Inlet and Outlet fittings are standard 23mm male & female tapers and are individually replaceable. Other connector options are available upon request.
Mounting holes in rear are interchangeable with other vaporizers.