Bickford Anesthesia Machine with ISO Vaporizer Bundle Deal
BIC51111-B
Anesthesia Machine Features
- Cast aluminum base with brushed and buff polished finish.
- Mounted on 3" ball bearing casters, 2 with brakes, 28" diagonal wheel base.
- Table top is solid aluminum plate, 13" square, bolted to the base through a 3" diameter chromed steel column.
- All components are mounted to the table top, including the back-bar or lab-rack, which mounts the flowmeters and vaporizers.
- Left front corner is fitted with an aluminum pole for mounting the CO2 absorber close to the patient location with adjustable height provided. The SUPERSORBER™, CO2 absorber is standard and included in all models except model 61010. (Supersorber features described, below.)
- Also mounted at the left front corner is the common outlet and the oxygen flush valve module.
- Flowmeters are individual modules equipped with precision needle valves, etched scale, ribbed glass flowmeter tubes, protected and mounted in forged aluminum housings.
- Cylinder yokes are rear mounted and each is directly connected to the high pressure regulator port.
- On models equipped with 2 gases (O2 & N2O), a “fail safe” device is provided which cuts off N2O in the event that O2 pressure fails.
- All models provide D.I.S.S. connections for external gas supplies.
- One custom "E" Cylinder Yoke
- All controls, gauges, flowmeters, vaporizers, etc. are visible and accessible from the front of the anesthesia machine at eye level.
- 5 year warranty and comes fully assembled
ISO Vaporizer Features:
- Temperature compensated.
- Output concentration stable during assisted respiration pressure pulses.
- Filler-drain-contents window combined in easy access single unit.
- Large dial with easy to see numbers has “off” lock and calibration indents.
- Dial Rotation: CW to decrease and “off” CCW for “on” and increase.
- “Off” Position locks to prevent accidental actuation of vaporizer.
- When “Off”, vaporizing chamber is isolated and gas is bypassed to outlet.
- Tamperproof adjustments – dial seal must be broken for access.
- Sump may be removed for cleaning or wick replacement without disturbing calibration by removing one screw.
- Inlet and Outlet fittings are standard 23mm male & female tapers and are individually replaceable. Other connector options are available upon request.
- Mounting holes in rear are interchangeable with other vaporizers.
BIC51111-B
Bickford Anesthesia Machine with ISO Vaporizer Bundle Deal
/PennVet Catalog/TX - Product Categories/74 - Surgery Supplies & Equipment/76 - Anesthesia Equip - Machines/81 - Anesthesia Machines
/PennVet Catalog/TX - Manufacturers/AMBICK - A.M. Bickford
Product Detail Page